After 17 years we have send-off our Ferrari B17
With our milling machines, after 17 years we have send-off our Ferrari B17 und we have replaced this machine by a Makino F5. By doing so, we have progressed to a higher accuracy level, and we have again a modern machine with a faster machne control, which is better suiter for nowadays CAM software. This […]
We have bought an additional Kaiser 125 Ton press
In the middle of last year, we have bought an additional Kaiser 125 Ton press, and this press is overhauled by the Beisele company, as wel mechanically as electrically, and has entered our production in March to increase the capacity with our heavy presses. In this area we know have 2x a 250 Ton Kaiser, […]
The new cleanroom has been delivered
The new cleanroom has been delivered. It is 4 times larger than the old one, approximately 100 square meters ISO Class 8, divided into 2 area’s, one meant for assembling, testing and packaging inherently clean work, and one for not inherently clean work like tampon printing.
We have invested in a Haimer Power Clamp Preset NG
In our toolshop we have invested in a Haimer Power Clamp Preset NG in order to mount milling cutter in their housing. This method gives us a correctly mounted tool in shorter time.
Our cleanroom has been evaluated
After the commisioning last month of our cleanroom, now it also has been evaluated. As expected ISO class 7 for the intrinsic clean part, and ISO class 8 for the other area.
Tumbling/deburring has been relocated
Tumbling/deburring has been relocated, and the associated infrastructure was upgraded. Now the water treatment is on an elevated platform above the machines, and the associated drying equipment can be easily removed once not necessary.
Tool shop was upgraded
The wish to have tool shop engineering downstairs, has been fullfilled. Our crew has recently moved to the vacant old administration area. This area was upgraded recently, and simultaneously all offices on de Run 4216 have been equipped with an upgraded computer network.
Two students strengthen our toolshop
Two students from Euro-Techniek, Jordi Vlemmix and Reno Coppens have completed their education Allround Machining Fine Mechanical Engineering BBL level 3.Both gentleman have accepted a position, and strengthen our toolshop
Second 250 Ton Kaiser press has arrived
Three years after the first 250 Ton Kaiser press, the second one has arrived. Also this press was bought second hand, and in 8 months time revised completely by a specialised company in Germany. The capacity addition was necessary while the load on the heavy presses within the automatic group became too high. Also, for […]
Growth in the stamping department
To accommodate the growth in the stamping department, we bought an additional Kaiser 63 Ton press. Also this one is aimed at a fixed product, in order to realize a high delivery reliability and availability to the customer.