Phenom electron microscope available
In our metrology department, we have now a Phenom electron microscope available. This particular equipment now gives the possibility to look with magnifications up to 24000 times. This substantially adds to our existing capacity in quality control and problem solving.
Makino V22 milling machine
In our tool shop is invested in a Makino V22 milling machine, which is especially aimed at: highly accurate 3-axis milling of mold and die parts, the milling of hard material, up to 64 Rockwell.Machine has a 40.000 revs/minute spindle These two point make this machine attractive at technical level. The combination of both items […]
SIP Orion 5 CMM with a new control unit and measuring head
Hexagon Metrology, the company which has retrofitted our SIP Orion 5 CMM with a new control unit and measuring head, is proud on the job they did. Subsequently Hexagon Metrology published a case study to woo additional customers. In the pdf below, this is reported in English. Case study (Engels)
CMM measurement room is sufficiently accurate in it’s temperature control.
During the retrofit of our CMM, also the accuracy of the temperature control was tested by the supplier. A number of times, a 24 hour measurement has been performed, with several measurement programs, and as it appears, our measurement room is sufficiently accurate in it’s temperature control.
ISO-14644 at ISO class 8
On April, 26th, 3 of our Arburg molding machines and 2 flowboxes are validated for the production of medical clean devices according to ISO-14644 at ISO class 8 by GFPS mbH.
125 kW cold water installation replaced
In Euro-Techniek, we use a 125 kW cold water installation for process and equipment cooling. This machine has been replaced, resulting in a further reduction of our energy consumption. Simultaneously we have eliminated a halogen-based coolant by a natural coolant.
NEN-EN-ISO 13485:2003 (medical devices).
On demand of a number of customers and the related increase of medical parts supplied by us we have successfully applied for certification according to NEN-EN-ISO 13485:2003 (medical devices).
Arburg 420C-1000 with multilift V
As an extension of our machinery and possibilities in our injection moulding department, an Arburg 420C-1000 with multilift V has been bought. Starting from the installation, this machine will be primarily used in a project realted to Bio-plastics. The Arburg 420C-1000 is a 100 ton horizontal machine, with 420 mm between the tie-bars. With these […]
New central heating system
For the building which houses the tooling and stamping department, a new central heating system is installed. By doing so, we replaced the old units, which at itself already reduces our energy consumption. In addition, we have integrated the heating system in use for drying of air in the spark erosion department, which realises an […]
SIP Orion 5 control renewed
Since 1999, Euro-Techniek has available a SIP Orion 5. This measurement machine is still one of the most accurate available. At the end of last year we decided to renew the control by the company Hexagon. Eventually, this has resulted in a complete retrofit of our SIP Orion 5 coordinate measuring machine with a Leitz […]